CodeCell Dashboard
Real-Time Motion Sensor Telemetry
CodeCell Dashboard is an iOS and iPadOS application that turns your iPhone or iPad into a live motion sensor telemetry station. Paired with the CodeCell C3 hardware module, it streams, visualises, and exports high-frequency 9-axis IMU data in real time, with no cloud and no subscriptions.
Whether you are prototyping a robotics project, characterising a mechanical system, or exploring inertial sensing, CodeCell Dashboard gives you professional-grade visualisation and data export tools in a clean, intuitive interface.
IMPORTANT: CodeCell Dashboard requires the CodeCell C3 sensor board to function. The app cannot record or display data without an active Bluetooth connection to a CodeCell C3 device.
Available at microbots.io or from authorised distributors.
The CodeCell C3 is a compact 1.85 cm module built around the ESP32-C3 and a BNO085 9-axis IMU, streaming accelerometer, gyroscope, magnetometer, and Euler angle data at 100 Hz over Bluetooth Low Energy. CodeCell Dashboard handles everything else: live scrolling charts for all sensor axes, full-screen landscape views, pause and resume, and one-tap CSV export with millisecond-accurate timestamps, ready for downstream analysis in any tool of your choice.
Automatically scans for nearby CodeCell C3 devices the moment Bluetooth is ready. Connect with a single tap; no pairing codes or configuration required.
Monitor accelerometer (m/s²), gyroscope (°/s), magnetometer (µT), and orientation (roll, pitch, and yaw in degrees), all streaming at up to 100 Hz with a 10-second rolling window.
Tap any sensor card to expand it to a full-screen landscape view with an extended 15-second window for a closer look at your data.
Freeze the live stream at any moment to inspect what just happened, then resume without losing any buffered data.
Export the complete full-resolution data log as a timestamped CSV, including absolute timestamps and millisecond-accurate elapsed time for every sample, via the iOS share sheet.
Adaptive layout optimised for both iPhone and iPad, making full use of the larger iPad screen for an expanded view of all sensor channels.
CodeCell Dashboard is an independent project and is not sponsored by, affiliated with, or endorsed by Microbots or the CodeCell brand. The CodeCell C3 hardware is a product of Microbots; this application is a third-party companion developed independently.
CodeCell Dashboard is designed with strict privacy principles. The application only processes sensor data transmitted by the connected CodeCell C3 hardware. All data stays entirely on your device and is shared only if you explicitly choose to export it. The app does not record, store, or transmit any personal information, nor does it access any other data from your device.